Containerized firefighting pump sets
Basic Composition
- Frame made of iron profile beams, dimensioned according to the intended loads
- Wall panels consisting of an EI 60 A2 S1 fire-resistant panel, with 60’ fire resistance
- Roof cover consisting of an EI 60 A2 S1 fire-resistant panel, with an appropriate inclination for the drainage of stormwater
- Removable roof (if applicable, it can be removed together with the wall panels)
- Metal sheet floor (non-slip at points accessible topederastrians). This is not required if it is intended to be encased in reinforced concrete
- Fire-resistant main entrance with a key
- Side doors allowing access and ease of maintenance, opened either with a key or from inside the container
- Complete firefighting set (with a selection among combinations of electric and diesel pumps), mounted on appropriate beams
- Suction kit with appropriate cross-sections and devices
- Within the container, provisions for the future connection of suction and discharge lines, test line, cooling lines, with appropriate pipelines and all required hydraulic fittings and valves
- Exhaust pipe with a suitable end at the top of the container
- Fuel tank connected to the diesel engine
- Robust pipe supports to avoid oscillations and leaks
- Firefighting set electrical panels with full electrical connection
- Routing for the connection of the main supply of the electric pump and the electricity supply of the distribution panel
Auxiliary devices
- Distribution panel for auxiliary loads
- Lighting with switch and socket outlets
- Ventilation with gravity louvres at the inlet and outlet
- Radiator for maintaining an acceptable level that prevents damage to piping and pumps due to frost
Safety devices
- Sprinkler for internal fire extinguishing
- Security lighting
- Emergency exit bars to prevent the entrapment of staff
- Fire extinguisher
Reduced footprint
Occupies significantly less space compared to conventional pumping stations
Fully equipped
Provided with all accessoriew and equipment necessary for its proper operation
Design & implementation
Idator offers a complete system that includes:
- Design
- 3D Drawings
- Installation (upon request)
Total warranty
Total guarantee offered for the proper operation of the system
Comprehensive trial
Full trial and checks in our premises using modern equipment
Outdoor installation
The container is transported as a complete system in order to be installed in the outdoor area of the building, it only requires a connection to the water supply network and to the electricity network
Ease of access
Easier access to the container, especially in case of a breakdown
Space saving
The compact solution compared to the conventionally constructed fire pump station takes up significantly less space in the project.
Full equipment
Offered with all accessories and necessary equipment for proper operation.
Total warranty
A comprehensive warranty is provided for the correct operation of the system.
Comprehensive test
Complete testing and inspection at our facility with state-of-the-art equipment.
External installation
The container is transported as a complete system for installation on the outside of the building. Only a hydraulic connection and power supply is required for start-up.
Ease of access
In contrast to conventionally constructed firefighting pump sets, access to a containerized firefighting pump set is easier, especially in the event that intervention is required to repair a malfunction.